RP-2002 Releasing Control Panel is a UL listed six-zone fire alarm and clean agent release panel designed for single and dual hazard suppression systems. It supports cross-zoning, programmable NACs or releasing circuits, System Sensor i3 detector compatibility, and complete system supervision for dependable fire protection.
36.000,00 EGP
RP-2002 Releasing Control Panel is a six-zone fire alarm control panel designed for single and dual hazard clean agent releasing applications. It provides fast detection, dependable signaling, and accurate control of fire suppression systems in commercial, industrial, and institutional facilities.
As a result, the panel delivers reliable protection for critical areas that require clean agent fire suppression.
The RP-2002 Releasing Control Panel supports a wide range of conventional initiating devices. These include two-wire and four-wire smoke detectors, manual pull stations, waterflow switches, tamper switches, and other normally open contact devices.
In addition, the panel is fully compatible with System Sensor i3 series detectors. These detectors provide maintenance trouble signals when cleaning is required. They also send supervisory freeze alerts when ambient temperature drops below approximately 45°F (7.22°C).
The panel includes four output circuits that can operate as Notification Appliance Circuits (NACs) or releasing circuits. Therefore, it allows flexible system design for different suppression applications.
The RP-2002 Releasing Control Panel also provides three programmable Form-C relays for Alarm, Trouble, and Supervisory conditions. In addition, it offers both resettable and non-resettable 24 VDC power outputs on the main circuit board.
The system continuously monitors field wiring, AC input, battery charger, and battery condition. Because of this supervision, the panel ensures stable and reliable operation.
When an initiating device activates, the panel triggers audible and visual notification appliances. At the same time, it displays alarm information on the backlit LCD, sounds the internal piezo sounder, and activates alarm relays. Moreover, optional modules can notify remote stations or control auxiliary equipment.
RP-2002 Releasing Control Panel meets NFPA 12, 12A, 12B, and NFPA 2001 requirements for clean agent releasing systems. It supports cross-zone (double-interlock) logic, dual hazard operation, and adjustable pre-discharge, discharge, and waterflow delay timers.
Furthermore, the panel is UL 864 (9th Edition) listed, FM approved, and compliant with International Building Code (IBC) seismic requirements.
The RP-2002E version supports 220/240 VAC input power while offering the same features as the standard model. Consequently, the system suits both local and international installations.
UL 864 (9th Edition) listed and FM approved
Six Style B (Class B) initiating device circuits
Dual hazard and cross-zone operation
Four programmable NACs or releasing circuits
System Sensor i3 detector compatibility
Strobe synchronization for major manufacturers
Three programmable Form-C relays
7.0 A total 24 VDC output current
Resettable and non-resettable power outputs
Built-in programmer and ANN-BUS communication
80-character backlit LCD display
256-event history log
Real-time clock with daylight savings control
Full supervision of wiring, power, and batteries
At Selectmep, we specialize in supply and installation of UL/FM &LPCB fire protection systems (fire fighting and fire alarm systems) with accordance to the NFPA & European standards to ensure the safety of your premises.
© Copyright 2024 | SelectMep | Designed by KeepOnline
