General
The NFS2-640 intelligent Fire Alarm Control Panel is part of the
ONYX® Series of Fire Alarm Controls from NOTIFIER.
In stand-alone or network configurations, ONYX Series products
meet virtually every application requirement.
The NFS2-640’s modular design makes system planning easier. The
panel can be configured with just a few devices for small building
applications, or networked with many devices to protect a large campus or a high-rise office block. Simply add additional peripheral
equipment to suit the application.
A host of other options are available, including single- or multichannel voice; firefighter’s telephone; LED, LCD, or PC-based graphic
annunciators; networking; advanced detection products for challenging environments; wireless fire protection; and many additional
options.
NOTE: Unless called out with a version-specific “E” at the end of the part
number, “NFS2-640” refers to models NFS2-640 and NFS2-640E; similarly, “CPU2-640” refers to models CPU2-640 and CPU2-640E.
ONYX® Series panels integrate with the Connected Life Safety Services (CLSS) platform through the CLSS Gateway, providing
connectivity to central station, cloud, and mobile applications. (See
HON-62034.) This cloud-based functionality provides reliable protection and remote monitoring of the system, reduced manual data
entry, and reporting.
Features
• Certified for seismic applications when used with the appropriate
seismic mounting kit.
• Approved for Marine applications when used with listed compatible equipment. See DN-60688.
• One, expandable to two, isolated intelligent Signaling Line Circuit
(SLC) Class A, B, or X.
• Wireless fire protection using SWIFT Smart Wireless Integrated
Fire Technology. See DN-60820.
• Up to 159 detectors and 159 modules per SLC; 318 devices per
loop/636 per FACP or network node.
– Detectors can be any mix of photo, thermal, or multi-sensor;
wireless detectors are available for use with the FWSG(A).
– Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay;
wireless modules are available for use with the FWSG(A).
• Standard 80-character display, 640-character large display
(NCA-2), or display-less (a node on a network).
• Network options:
– High-speed network for up to 200 nodes (N16e/x, NFS2-3030,
NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM,
ONYXWorks, NFS-3030, NFS-640, and NCA).
– Standard network for up to 103 nodes (N16e/x, NFS2-3030,
NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM,
ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging.
• 6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor,
Wheelock, or Gentex strobe synchronization.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• Optional cloud connectivity for remote off site monitoring through
CLSS (see HON-62034)
• Monitor multiple buildings through one off-campus central station,
and report through the CLSS Gateway
• Optional remote programing through CLSS
• Field-programmable on panel or on PC.
• VeriFire® Tools online or offline programming utility. Upload/
Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.
• Autoprogramming and Walk Test reports.
• Multiple central station communication options:
– Standard UDACT
– Internet
– Internet/GSM
• 80-character remote annunciators (up to 32).
• EIA-485 annunciators, including custom graphics.
• Printer interface (80-column and 40-column printers).
• History file with 800-event capacity in nonvolatile memory, plus
separate 200-event alarm-only file.
• Alarm Verification selection per point, with automatic counter.
• Presignal/Positive Alarm Sequence (PAS).
• Silence inhibit and Auto Silence timer options.
• March time/temporal/California two-stage coding/strobe synchronization.
• Full QWERTY keypad.
• Battery charger supports 18 – 200 AH batteries.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill using monitor
modules.
• Automatic time control functions, with holiday exceptions.
• Surface Mount Technology (SMT) electronics.
• Extensive, built-in transient protection.